Tentacle Setup
by Tentacle Sync GmbH
Setup and Control of your Tentacle Devices
| App Name | Tentacle Setup |
|---|---|
| Developer | Tentacle Sync GmbH |
| Category | Tools |
| Download Size | 5 MB |
| Latest Version | 7.3.1 |
| Average Rating | 4.69 |
| Rating Count | 135 |
| Google Play | Download |
| AppBrain | Download Tentacle Setup Android app |
Set. Sync. Record.
Control your Tentacle timecode generator SYNC E, the new TRACK E timecode audio recorder and your first generation Tentacle timecode generators with one app!
Have fun working with your Tentacles! Questions or suggestions? Just contact us via [email protected]
---
The Tentacle Sync E and Tentacle Track E work without any cable. Just switch on Bluetooth and follow the instructions of the App. You can monitor and control all running devices in your reach including their:
- Timecode
- Sync Status
- Device Name
- Frame Rate
- Battery Charge
- Timecode Output Level (Sync E)
- Recording status, level, format & time (Track E)
- Low Cut Filter (Track E)
- Headphone volume (Track E)
- Microphone plugin power (Track E)
- SD Card formatting (Track E)
- Playback and file information (Track E)
For the first generation Tentacle your Android device needs to support USB Host Mode ("USB On-The-Go") and you need an USB OTG cable together with a Micro USB adapter cable.
For further information please check: www.tentaclesync.com
Recent changes:
- TIMEBAR: adjust slate mode hold time in 0.1s steps
- TIMEBAR: show current hold time above slider
- TIMEBAR: fix layout on small screens
Control your Tentacle timecode generator SYNC E, the new TRACK E timecode audio recorder and your first generation Tentacle timecode generators with one app!
Have fun working with your Tentacles! Questions or suggestions? Just contact us via [email protected]
---
The Tentacle Sync E and Tentacle Track E work without any cable. Just switch on Bluetooth and follow the instructions of the App. You can monitor and control all running devices in your reach including their:
- Timecode
- Sync Status
- Device Name
- Frame Rate
- Battery Charge
- Timecode Output Level (Sync E)
- Recording status, level, format & time (Track E)
- Low Cut Filter (Track E)
- Headphone volume (Track E)
- Microphone plugin power (Track E)
- SD Card formatting (Track E)
- Playback and file information (Track E)
For the first generation Tentacle your Android device needs to support USB Host Mode ("USB On-The-Go") and you need an USB OTG cable together with a Micro USB adapter cable.
For further information please check: www.tentaclesync.com
Recent changes:
- TIMEBAR: adjust slate mode hold time in 0.1s steps
- TIMEBAR: show current hold time above slider
- TIMEBAR: fix layout on small screens
